八大胜

Product features

• ▪ 7-inch touch screen operation;
  
• ▪ The vehicle electronic interference simulator supports multiple languages, which is convenient for different users;
  
• ▪ Built in environment automatic detection program, automatically detect the test environment and remind users;
  
• ▪ Programmable operation, realizing the setting function with one key;
  
• ▪ Built in international standard grade parameters, easy and fast operation;
  
• ▪ Rs232/usb interface, which can be controlled by PC and print test report.

Product parameters

• Model of automobiles electronic interference simulator
  

  P5a
  

  Pulse voltage us
  

  Input impedance ri
  

  Pulse width TD
  

  Rising edge tr
  

  Pulse interval T1
  

  Number of pulses:
  

  P5b
  

  In pulse voltage us
  

  Mid pulse limiting voltage US1
  

  Input impedance ri
  

  midpsulse width TD
  

  Rising edge tr
  

  Mid pulse interval T1
  

  Number of pulses n
  

  EUT power capacity
  

  Equipment power supply

• RV P5
  

  12V system /24v system
  

  40 ~102V/100 ~202V
  

  0.5Q~8Q
  

  40ms ~ 400ms
  

  5ms ~ 10ms
  

  1min ~ 5min
  

  1~9999 times
  

  12V system /24v system
  

  40~102V/100 ~202V
  

  20~102V/20~202v
  

  0.5~8Q
  

  40ms ~ 400ms
  

  5ms ~10ms
  

  1min ~ 5min
  

  1 ~ 9999 times
  

  20A
  

  AC220V±10% 50/60Hz

Product recommendation

Single Phase 10A Voltage Dips Generator

Model：VDT S10

Voltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or interruptions. Voltage changes are caused by continuous changes in the loads connected to the grid. If the EUT cannot respond in time to changes in the power supply voltage, it may cause malfunctions. Voltage dips generators are used to evalsuate the performance of electrical and electronic equipment when subjected to voltage dips/sags, short interruptions, and voltage changes. Products fully meet the requirements of standards IEC/EN 61000-4-11 and GB/T17626.11.

Learn more

Impulse current generator sur 20KA

Model：SUR 20KA

The lightning surge generator sur 20KA is used to inspect the anti surge protection devices such as zinc oxide arrester valve piece, varistor, SPD, TVs tube, gas discharge tube, etc. for surge impact test. The product produces 8/20us surge pulse waveform, and the technical indicators of the waveform comply with the provisions of national standards and IEC standards.

Learn more

Single phase 10kV multifunctional lightning surge generator sur s10l

Model：SUR S10L

The lightning surge generator sur s10l meets two kinds of surge waveforms: 1.2/50us and 10/700us. It is a surge (shock) immunity test product designed for the power port and communication port of various electronic and electrical products, which is used to evalsuate the performance of electronic, electrical, communication and other products when they are subjected to high-energy disturbance from the power port and other signal ports. The product meets the requirements of new standards such as IEC 61000-4-5 and gb/t 17626.5.

Learn more